Printing Speed (Max Toolhead): 500 mm/s
Build Volume: 420 × 420 × 480 mm
Firmware: Klipper pre-installed
Extruder Type: Direct-Drive dual-gear
Nozzle Max Temperature: 300 °C
Supported Nozzle Diameter: 0.4 mm (high-flow variant supplied)
Heated Bed Max Temperature: 85–100 °C
Build Plate: 420 × 420 mm textured PEI magnetic spring-steel sheet
Bed Leveling System: 11×11 auto-leveling (121 points) + manual knobs
Acceleration: Up to 8,000 mm/s² (factory spec)
Frame Dimensions: 658 × 632 × 740 mm
Net Weight: 18 kg
Spool Holder: Top-mounted for 1 kg filament (supports larger spools)
Connectivity: WiFi, LAN (RJ-45), USB Type-A, micro-SD
Control Interface: Color touch-screen (removable)
Sensors & Cameras: Filament run-out sensor, power-loss recovery, accelerometers on X & Y axes for input-shaping calibration
Materials Supported: PLA, PETG, TPU, ABS, Nylon (and other high-temp filaments)
Air Filtration: None specified (large-format open cabinet style)
Power Supply: 320 W bed heater, 60 W hotend, AC 100-240 V input
zoom_in
ELEGOOprecision_manufacturingFDM Printers
Elegoo Neptune 4 Max
check_circleمتوفر
ELEGOO Neptune 4 Max – XL-Speed Industrial-Style FDM Machine
550 دينار615 ديناروفّر 11%
مطلوب دفعة مقدمة 10%. الدفع نقداً (دينار أردني) أو كليك أو أرسل لقطة شاشة على واتساب.
المواصفات الفنية
مواصفات Elegoo Neptune 4 Max
| Printing Speed (Max Toolhead) | 500 mm/s |
| Build Volume | 420 × 420 × 480 mm |
| Firmware | Klipper pre-installed |
| Extruder Type | Direct-Drive dual-gear |
| Nozzle Max Temperature | 300 °C |
| Supported Nozzle Diameter | 0.4 mm (high-flow variant supplied) |
| Heated Bed Max Temperature | 85–100 °C |
| Build Plate | 420 × 420 mm textured PEI magnetic spring-steel sheet |
| Bed Leveling System | 11×11 auto-leveling (121 points) + manual knobs |
| Acceleration | Up to 8,000 mm/s² (factory spec) |
| Frame Dimensions | 658 × 632 × 740 mm |
| Machine Weight | 18 kg |
| Spool Holder | Top-mounted for 1 kg filament (supports larger spools) |
| Connectivity | WiFi, LAN (RJ-45), USB Type-A, micro-SD |
| Display | Color touch-screen (removable) |
| Sensors & Cameras | Filament run-out sensor, power-loss recovery, accelerometers on X & Y axes for input-shaping calibration |
| Materials Supported | PLA, PETG, TPU, ABS, Nylon (and other high-temp filaments) |
| Air Filtration | None specified (large-format open cabinet style) |
| Power Supply | 320 W bed heater, 60 W hotend, AC 100-240 V input |
حول هذا المنتج
الوصف
ما بعد البيع
الضمان والدعم
verified_user
ضمان 12 أشهر
تغطية ضمان كاملة من الشركة المصنعة
support_agent
دعم محلي في الأردن
PRINTie 3D يوفر دعم فني مباشر في عمّان
groups
آراء العملاء
التقييمات والمراجعات
—
0 تقييم
hourglass_empty
أسئلة وأجوبة
أسئلة حول المنتج
hourglass_empty
قد يعجبك أيضاً
